G50/G55 High Speed Carbide Gear Hob with AT Coating
2023-04-24 14:27:28
jiangxingTools
1999
G50/G55 High Speed Carbide Gear Hob with AP Coating
base material: carbide G50 or G55
bore type gear hobs, BALINT ALTESA coating
solid carbide hobs for high speed gear hobbing, high hardness optimal selection.
recommended linear speed 150m/in-220m/min
recommended hob feed 0.15-0.35mm/r
oil cooling cutting environment
recommended hardness of processed material from HRC 45°-HRC 62° (secondary fine hobbing is recommended for HRC 56° to HRC 62°）
accuracy class DIN AA, AAA
solid carbide gear hob cutter with bore sizes: 8mm, 10mm,13mm, 16mm, 22mm, 27mm,32mm
tooth profile: DIN3972 stanard, for finishing cut
相關(guān)文章
-
PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m2
PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m2Tooh profile is according to GB,... - Heavy duty roughing hobs
- PA20° DP14 Standard Involute Hob with BPⅡ
- K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-Topping
- PA20° Profile DIN3972 Standard Gear Cutting Hob with Module m3.75
- ?PA20° PCD 240mm Disk Type Gear Shaper Cutter with Big Module m14~m16
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m9
