Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2394
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
PA20° DP6 Standard Gear Hobber Cutter with BPⅡ
PA20° DP6 Standard Gear Hobber Cutter with BPⅡdiametral pitch: Dp6, pressure angle: PA20°hob size: O... - Timing Pulley Hob for (AT.)D.T (D)T5
- Technical Information for Hobs
- Chongqing Jiangxing Tools
- PA20° Inserted Blade Gear Hob with Module m12
- PA20° Profile DIN3972 Standard Pre-grinding Hob Cutter with Module m3.5
- PA20° PCD 180mm β15° Disk Type Gear Shavng Cutter with Module m1.25~m6
