Bohler S790 Microclean for Hobs
2022-08-19 13:50:02
jiangxingTools
2380
Bohler S790 Microclean for Hobs
Material composition of S790: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30
Standard: 1.3345, HS6-5-3C, EN ISO 4957
Performance feature of Gear Hobs with S790:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: good
Edge Stability: good
Grindability: high
Hot Hardness (red hardness): good
相關(guān)文章
-
PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m4.5
PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m4.5Tooh profile is acco... - PA20° Standard Gear Milling Cutter with Module m0.35
- PA20° Pre-shaving Gear Cuter Hob with Module m4.25
- PA20° DP4.5 Standard Gear Cutting Hob with BPⅡ
- PA30° DIN5480 Involute Spline Gear Hob with Module m8
- Notice for Hob Coating
- HSS Fine Pitch Gear Hob Cutter with DIN 58412 Standard
