Processing Steps for Carbide Gear Hobs
2022-08-18 10:47:06
jiangxingTools
2102
Processing Steps for Carbide Gear Hobs
Chongqing Jiangxing Tools is supplying carbide gear hobs with module m0.5-m3, in P, M, K series type materials.
1), Raw carbide material
2), Inside diameter grinding
3), End face grinding
4), Hub grinding
5), Tooth groove grinding
6), Tooth profile grinding
相關(guān)文章
-
PA20° Profile DIN3972 Standard Pre-grinding Gear Hob Cutter with Module m1.75
PA20° Profile DIN3972 Standard Pre-grinding Gear Hob Cutter with Module m1.75Tooh profile is accordi... - Disc-type gear pinion cutter with DIN 5482
- PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m5
- PA20° Standard Involute Gear Milling Cutter with Module m5.5
- Defination of Basic Hob Profiles
- HSS M2, M35 Gear Hobbing Cutters with Protuberance
- Solid Gear Hob with Standard Dimensions
