Sprocket Milling Cutter
2022-06-28 10:04:15
jiangxingTools
2462
Sprocket Milling Cutter
Specification: P9.525*R6.35, P12.7*R8.51, P15.875*R10.16, P19.05*R11.91, P25.4*R15.88, P31.75*R19.05, P38.1*R22.23, P44.45*R25.4, P50.8*R28.58
Standard: GB
Material: HSS
number of milling cutters for chain sprocket are groups, No.1-5 are a full set of sprocket milling cutters.
相關(guān)文章
-
PA20° Module m2.25 Standard Involute Gear Hobbing Cutter
PA20° Module m2.25 Standard Involute Gear Hobbing CutterTooth profile: DIN3972-2 standard, GBMateria... - HSS M2, M35, ASP30, ASP52, S390 Bowl Type Gear Shaper Cutter with DIN1829 Quality
- HSS M2, M35 Spline Hobs for Spline Shafts
- Timing Pulley Hob for STS 14M
- PA20° Module m10 Standard Involute Gear Hob
- Rake for Gear Cutting Hob
- PA20° Profile DIN3972 Standard Gear Cutting Hob with Module m6.5
